AMD/ATI Pixel Clock Patcher modifies the AMD/ATI video driver to allow higher resolutions and refresh rates by removing the 165 MHz pixel clock limit for single-link DVI and HDMI, the 330 MHz limit for dual-link DVI, and the 400 MHz limit for VGA.
ToastyX’s AMD / ATI Pixel Clock Atikmdag Patcher has long been used to modify AMD / ATI video drivers to provide higher performance by removing the 165 MHz clock limit for single-channel DVI and HDMI, the 330 MHz limit for dual-channel DVI, and the 400 MHz limit for VGA Which is useful for everyone who is mining with ATI / AMD GPUs. this tool also has the ability to fix video drivers and remove BIOS signature verification. The new version of AMD & ATI Pixel Clock 1.5.0 now has a function for automatic driver installation (Radeon Software Crimson ReLive Edition Beta for Blockchain Compute driver pack), as well as a number of useful innovations
The new version of Atikmdag Patcher v1.5.0 & Windows x32 / x64 (AMD & ATI Pixel Clock) is already available for download from the links below:
Windows Vista or later
5000-series GPU or newer
R9 285/290/290X/295X2 and newer cards can handle higher pixel clocks without CrossFire bridges.
Older cards require two CrossFire bridges if the pixel clock is greater than 300 MHz. This is only possible with cards that have two connectors. It will not work properly with more than two cards. Dual-GPU cards such as the 7990 will not work properly at higher pixel clocks.
Version 1.4.7 is compatible with Catalyst 11.9 to Adrenalin 20.2.2. It can be used with future versions if it finds the limits you need.
Run atikmdag-patcher.exe. (If you only need the BIOS signature patch, rename it to atikmdag-patcher-bios.exe first.)
If all limits are found, click “Yes” to patch and sign. If a limit is not found or if multiple matches are found, the patcher needs to be updated.
To restore the unpatched driver, run the patcher again and click “Yes” to restore from backup.
Unpatching is not required before upgrading drivers. Simply run the patcher again after installing the new driver.
Legacy drivers may have issues with HDCP and video acceleration with the patch.
Workarounds for video playback issues with legacy drivers:
Disable hardware acceleration in the Flash Player settings (right-click on any Flash video and click “Settings…”).
Use the Codec Tweak Tool to disable DXVA hardware acceleration under “Various Tweaks” (in the “Miscellaneous” section).
Older cards require the “LCD standard” vertical blanking/total to reduce the memory clock when idle. Horizontal values can still be reduced if necessary. Newer cards can handle some lower values depending on the resolution and refresh rate.
Older cards have a design limitation unrelated to the patch that causes video acceleration to scramble the screen if the vertical blanking/total is below standard with the video card’s memory overclocked or with multiple monitors connected. Skype is known to trigger this problem. Either don’t overclock the video card’s memory, or use the “LCD standard” vertical blanking/total in CRU.
This post is also available in: РусскийATIFlash & AMD VBFlash v2.93 is used to flash the BIOS of the video card. The ATI version was called ATIFlash, or simply WinFlash. It supports all AMD Radeon graphics cards such as RX 5700, RX 5600, RX 5500. You can also flash BIOS […]