This post is also available in: Русский
SRBMiner-MULTI
Changes:
V0.3.1 + Fixed ERROR 0x4002
Dev-Fee:
0.00%
+ blake2b + yespowerurx
~0.85%
+ blake2s + cpupower + eaglesong + kadena + keccak + m7mv2 + mtp + randomarq + randomsfx + randomv + randomwow + randomx + randomxl + rfv2 + yescrypt + yescryptr16 + yescryptr32 + yescryptr8 + yespower + yespower2b + yespoweric + yespoweriots + yespowerlitb + yespowerltncg + yespowerr16 + yespowersugar
Supports Algorithms:
[CPU ONLY]
+ cpupower + m7mv2 + randomarq + randomsfx + randomv + randomwow + randomx + randomxl + yescryptr16 + yescryptr32 + yescryptr8 + yespower + yespower2b + yespoweric + yespoweriots + yespowerlitb + yespowerltncg + yespowerr16 + yespowersugar + yespowerurx
[CPU & GPU]
+ blake2b + blake2s + eaglesong + k12 + kadena + keccak + mtp + rainforestv2 + yescrypt
Note: MTP scratchpad creation is very slow at the moment, it is waiting on a big rewrite. This has an impact on poolside hashrate if a lot of new works are sent out.
Supported Devices:
- VEGA 56/64/FE/VII
- RX 460/470/480/550/560/570/580/590
- R9-285/285X/380/380X
- R9-290/290X
- R9-Fury/Nano
- + Processors
Configure SRBMiner-MULTI
EXAMPLES OF USING
1. Disable CPU mining, use only GPU mining
Code: SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-cpu
2. Run the miner in the background without a console window, with the API enabled on port 17644:
Code: SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --background --api-enable --api-port 17644
3. Disable mining on the GPU, use 7 CPU threads with advanced registration and storage in Logs log.txt file
Code: SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 7 --log-file Logslog.txt --extended-log
4. A complete example for mining CPU and GPUs only from cmd (4 GPU / s and 7 CPU threads using the K12 algorithm are used)
Code: SRBMiner-MULTI.exe --algorithm k12 --gpu-id 0,1,2,3 --gpu-intensity 26,25,26,26 --gpu-worksize 256,256,256,256 --gpu-threads 1,1,1,1 --cpu-threads 7 --pool your-pool-here --wallet your-wallet-here
5. Disable mining on the GPU, use 15 CPU threads with advanced registration enabled and save in Logs log.txt file, start Randomx mining from a block height of 1978433 and run the miner in the background
Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 15 --log-file Logslog.txt --extended-log --background --start-block-height 1978433
CPU MINING SETUP
If you do not set the –cpu-threads or –cpu-affinity parameters, the miner will try to automatically find the optimal settings for your system. Sometimes automatic tuning cannot find the optimal settings, so you should find it by experimenting.
You need to set the number of worker threads (–cpu-threads) and bind them to the corresponding PU (processor) using –cpu-affinity.
You can calculate the affinity mask here:
Examples to get you started:
4 CORE / 8 THREADS CPU :
1. Use 4 threads, 1 on every core : –cpu-threads 4 –cpu-affinity 0x55 2. Use 8 threads, 2 on every core : –cpu-threads 8 –cpu-affinity 0xFF
6 CORE / 12 THREADS CPU :
1. Use 6 threads, 1 on every core : –cpu-threads 6 –cpu-affinity 0x555 2. Use 12 threads, 2 on every core : –cpu-threads 12 –cpu-affinity 0xFFF
RANDOMX EXTRA TWEAKS
To take advantage of the increased hash rate:
1. Miner must run with administrator privileges [right click on SRBMiner-MULTI.exe->properties->compatibility-> check ‘Run this program as an administrator’ option-> click OK button 2. Make sure WinRing0x64.sys is in the same folder as SRBMiner-MULTI.exe При включении дополнительных настроек некоторые значения регистров изменяются, и после перезагрузки компьютера они возвращаются к исходному значению.
To take advantage of If the miner starts to freeze or gives bad results after enabling additional settings, you can try the ra –randomx-use-tweaks ’parameter, where you can determine which settings / settings you want to enable. Increased hash rate:
Without this option, the miner includes all available settings (the same as –randomx-use-tweaks 0123 for AMD, –randomx-use-tweaks 0 for Intel), but using –randomx-use-tweaks you can determine which of them you want to use.
There are at the moment: Intel – 1 tweak Amd – 5 tweaks
The index starts at 0, so you have 0 1 2 3 4 for options on AMD.
Here is an example:
+ Use tweaks No. 0 and 3 (do not use 1 and 2)
Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 03
The order of the tweaks does not matter, so writing 03 is the same as 30. What you need to do is find which tweak or combination of tweaks creates problems. You should try to turn on the tweaks one by one and check if the miner works stably with one tweak, and if so, test the next one, etc. Fortunately, there are not many combinations for you (because 0123, for example, is the same as 3021 or 1302 ..)
So, let’s start with:
Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 0
If it has been working smoothly for some time, try the following:
Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 1 and so on, until you find the one that makes the trouble.
Then try combining tweaks to find a combination that works for you.
If you have a senior gene. Ryzens, try this combination of tweaks:
Code:--randomx-use-tweaks 0134
VIDEO TUTORIALS SRBMiner-MULTI
How to install multi-algorithmic pools
How to get Kadena coin
How to mine Monero RandomX
How to mine Nervos CKB
How to mine MicroBitcoin
Recommended Related Articles:
- Gminer v1.96 Download miner for AMD and Nvidia: Equihash, Cuckatoo, Cuckaroo, Beam Hash
- lolMiner 0.9.7: Download the Equihash & Cuckatoo miner
- miniZ 1.5t – Download Equihash Miner for Nvidia GPU
- PhoenixMiner 4.9c: Download Ethash Miner for AMD NVIDIA GPU
- OverdriveNTool v0.2.8 (Overclock and Underclock AMD GPU)
- AMD Memory Tweak (Modifying the BIOS AMD GPU)