TT-Miner v3.2.2 (TradeTec-Miner): Nvidia & AMD GPU miner

This post is also available in: ruРусский

TT-Miner 3.2.2 (TradeTec-Miner): Nvidia & AMD GPU miner

TT-Miner v3.2.2 (Nvidia GPU miner) — program for video cards of the Nvidia family. It is mainly used for mining on the ProgPOW algorithm. It takes the miner about 4-5 minutes until he shows a stable hash rate.

  • DevFeeis 1% for all algorithms.
  • Please note that the Linux version of TT-Miner requires Ubuntu 18.04 or later!

Complete list of available versions TT-Miner: https://cool-mining.com/tag/tt-miner/

TradeTec-Miner

Features of TT-Miner:

  • Features of TT-Miner:
  • Video Card Performance Monitoring
  • Video Card Performance Monitoring
  • Switching a farm or just one video card to other pools or another coin in a few seconds
  • Low memory and processor power
  • Supports CUDA 9.2 and CUDA 10.0

Supported Algorithms:

  • PROGPOW (BCI)
  • PROGPOWZ (Zano)
  • PROGPOW092 (HORA, Hydnora, Sero & Abassian)
  • ETHASH (ETH, ETC, Music, Callisto, etc)
  • UBQHASH (UBIQ)
  • MTP (Zcoin)
  • LYRA2REV3 (Vertcoin)
  • EPIC (Epic Cash)
  • EAGLESONG (CKB-Nervos)
  • EAGLESONG (CKB-Nervos)
  • BLAKE2S Blake2S (KDA-Kadena)

System requirements:

Setting TT-Miner

To quickly start cryptocurrency mining with TT-Miner, you need:

  1. Download program
  2. Unzip it to any convenient place
  3. Change wallet to your

After downloading the program, you will find ready-made examples of customized .bat files for mining and instructions in Russian.

For quick launch, just open the file with the .bat extension in any text editor and replace the wallet with your own. Below we will tell you how to do this, as well as how to more finely tune the program to your needs.

So, let’s start editing the batch file – we need to change the wallet address and configure some other parameters for your equipment. To do this, right-click on the .bat file and select the “Edit” item.

A text document opens with command line arguments. Consider what kind of teams are contained in our batch file.

Customizing a batch file

Example of bat file

TT-Miner.exe -A BLAKE2S -coin kda -luck -log -logpool -P YOUR_WALLET.YOUR_WORKER@kda-us.icemining.ca:3700
TT-Miner.exe -A BLAKE2S -coin kda -luck -log -logpool -P https://YOUR_WALLET@NODE_SERVER:NODE_PORT
setting up a batch file TT-Miner 3.0.5 (Nvidia GPU miner)
  1. TradeTec-MinerCmd.exe – indicate in the batch file which program we want to run. This file should be in the same folder as our batch file
  2. PROGPOW-100 – specify the coin algorithm that we are going to mine
  3. iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – after the construction -P stratum + tcp: // specify the address of our digital wallet. You can take it on the exchange where the coin is traded, or install a cold wallet
  4. rig1 –after we entered the wallet address, put a dot and indicate the name of our farm. You can use any. This is necessary to track statistics on the pool.
  5. bci-eu.coinblockers.com – after the @ sign we indicate the address of the pool.
  6. 3910 specifying the address of the pool, put a colon and indicate the port of the pool
  7. —list-devices – the command will display all available mining devices

These are all the necessary commands to run the program. Below is an example with payfrom (payout mode). On some pools, you can adjust the frequency of payments. We have commented out this example with the REM team. If you remove this command, then example No. 2 will be used.

So we set up the program for the first launch. How to run it? The cryptocurrency mining process is launched by double-clicking on the created or edited batch file (file with the .bat extension). So, we launch and look at what the program console writes to us.

miner console TT-Miner 3.2.0 (Nvidia GPU miner) Download and Configure
  1. TradeTec-Miner – the program reports the installed version
  2. Found 2 CUDA devices – two mining devices available
  3. #0 PCI 0:1 GeForce GTX 1080 Ti (6.1) CoreClk 139 MHz | MemClk 495 MHz | 11264 MB | SM: 28 – name of the video card, overclocked its core and memory, available amount of video memory
  4. bci-eu.coinblockers.com:3910 – the pool that we indicated in the batch file
  5. iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg – address of the wallet to which the extracted coins will be sent
  6. YOUR WORKER – farm name (optional)
  7. Use algo: ProgPoW (Programmatic Proof-of-Work) – we specified the ProgPoW algorithm
  8. CUDA 10.0 – cuda architecture on which graphics cards work
  9. Press ‘Q’ – to stop mining and terminate if you press the Q key in the active miner window, the program will close
  10. Set nonce generation to mode: 3 — timeout: 0.00 secs. – nonce is set to mode 3. More on this below.
  11. Subscribed to bci-eu.coinbiockers.com:3910 – we were able to connect to the pool
  12. Received new job#: d27a – pool sent a new job for video cards
  13. Pool difficulty update: 0.08 GH – the pool set the difficulty to 0.08 GH. convenient power calculator you will find here
  14. Worker authorized: YOUR WORKER – we logged in to the pool
  15. create new DAG for epoch 6 – DAG file for mining is generated. Need to wait a bit
  16. DAG created in 2.7 seconds – DAG file created in 2.7 seconds
  17. Accepted 86 ms. bci-eu.coinbiockers.com:3910 – The pool made a decision (share) from our video card. The remuneration to the miners is paid precisely for the number of resolved ball.

It takes the miner about 4-5 minutes until he shows a stable hash rate.

Example batch file:

@echo off

:loop

TradeTec-MinerCmd.exe -A PROGPOW-100 -P stratum+tcp://iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg.rig1@bci-eu.coinblockers.com:3910 --list-devices

rem using payfrom on CoinBlockers
rem TradeTec-MinerCmd.exe -A PROGPOW-100 -P stratum+tcp://iN5h4sGcf1BD7R1mgaqkeGWnDvAubzyEKg.rig1:payfrom=5@bci-eu.coinblockers.com:3910 --list-devices

echo restart miner...
goto loop

Recommended Related Articles:

Bminer 16.0.7: Download the GPU miner Equihash / Ethash / Cuckaroo29 for AMD & Nvidia

GMiner 2.00 (Win / Linux 32/64-bit): Download miner for AMD / Nvidia GPUs

NiceHash Miner v3.0.0.5: Download and Configure for Windows

Claymore Dual v15.0 (NoFee) — AMDNVIDIA GPU Miner

lolMiner v0.9.8 – Download and Configure Nvidia / AMD miner for Windows

Leave a Reply

Your email address will not be published. Required fields are marked *

Next Post

Bitcoin reacted with a slight increase to the strengthening of the S & P 500

Wed Mar 18 , 2020
This post is also available in: РусскийLast Tuesday, March 17, the US stock index S&P 500 for a short time approached 2,500 points. Around the same time, Bitcoin was able to bounce to $ 5469. Then there was another fall of the S&P 500, while BTC also dipped to $ […]