SRBMiner-MULTI CPU & AMD GPU Miner v0.5.1 (Windows64 & Linux)

This post is also available in: ruРусский

SRBMiner-MULTI RandomX (Monero XMR miner)

SRBMiner-MULTI (RandomX) CPU and AMD GPU Miner – is a program for mining cryptocurrencies on various algorithms for the processor. AMD GPU Miner is a miner for mining cryptocurrencies on AMD family video cards. Both programs are part of a single release.

November 30, Monero (XMR) will work hard on block 1978433 to switch to a new algorithm. The upcoming fork will change the current CryptoNight R mining algorithm to the new RandomX PoW algorithm, essentially transferring the coin mining to the CPU.

There are already several miners mining coins using the RandomX algorithm, one of which is SRBMiner-MULTI. You can download the latest version of SRBMiner-MULTI miner from the links below.

0.5.1

  • Added algorithm ‘argon2id_chukwa’
  • Added algorithm ‘argon2d_dynamic’
  • Added parameter ‘–miner-priority’ to set priority of main miner process
  • Renamed ‘–cpu-priority’ to ‘–cpu-threads-priority’
  • Faster hashrate refresh interval for CPU workers
  • Fixed (probably) crash when mining with ‘randomepic’ algorithm
  • Bug fixes
DOWNLOAD LINKS:
    
 
198d65c1b6e6413c9465d07f6d9de2a2 *SRBMiner-Multi-0-5-1-win64.zip
0e27b9bea0e7d8f931a36e14480f8fcc *SRBMiner-Multi-0-5-1-Linux.tar.xz

Changelog:

SRBMiner-MULTI

Supports Algorithms:

  • Cpupower
  • RandomARQ
  • RandomWOW
  • RandomX
  • RandomXL
  • m7mv2
  • yescryptr16
  • yescryptr32
  • yescryptr8
  • yespower
  • yespower2b
  • yespowerlitb
  • yespowerltncg
  • yespowerr16
  • yespowersugar
  • yespowerurx
  • Blake2b
  • Blake2s
  • eaglesong
  • k12
  • Keccak
  • MTP
  • rainforestv2
  • Yescrypt

Supported Devices:

  • VEGA 56/64/FE/VII
  • RX 460/470/480/550/560/570/580/590
  • R9-285/285X/380/380X
  • R9-290/290X
  • R9-Fury/Nano
  • + Processors

Miner features SRBMiner-MULTI:

  • Guided Setup Mode
  • Ability to switch the algorithm without an external application
  • Running in the background without a console window
  • A hash watchdog timer that restarts the miner in case of a video card error
  • Video card temperature control and automatic shutdown if the temperature is too high
  • Shutting down the system when the temperature of the video card is too high
  • Auto miner restart if too many deflected ball
  • Running a monitor that ensures that your miner starts working properly
  • API for mining statistics
  • Web interface for tracking miner statistics
  • Multiple backup pools
  • Ability to add new pools on the fly without restarting the miner
  • Monitoring difficulty; do not connect to the pool if the difficulty level is too high
  • Timeout monitoring, do not connect to the pool if work is not received for a long time
  • Easily switches AMD graphics cards to computing mode

Configure SRBMiner-MULTI

In order to start mining, we need to create or edit a file with the extension .bat. Indicate the following commands in it:

SRBMiner-MULTI batch file
  1. SRBMiner-MULTI.exe — SRBMiner application launch command
  2. —algorithm randomx — specify the algorithm for mining
  3. —pool xmr-eu1.nanopool.org — specify pool address
  4. 14444 — specify pool port
  5. —wallet 44tLjmXrQN…22df3246g54a42178aa29ef7477c138d2340c55648d indicate coin purse + Payment ID after the point. The wallet can be obtained either on the exchange or install a cold Monero wallet.
  6. —gpu-target-temperature 70 — the program will strive to maintain this temperature
  7. —gpu-off-temperature 83 — the miner will turn off when this temperature is reached and turn on when it drops
  8. —send-stales — send outdated balls to the pool (some pools partially pay for them, or add bonuses).
  9. —enable-restart-on-rejected — auto miner restart if too many rejected ball

Example batch file:

setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100
@echo off
cd %~dp0

cls
set LOGTIME=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%
set LOGTIME=%LOGTIME: =%
set LOGTIME=%LOGTIME:,=.%.txt

SRBMiner-MULTI.exe --algorithm randomx --pool xmr-eu1.nanopool.org:14444 --wallet 44tLjmXrQNrWJ5NBsEj2R77ZBEgDa3fEe9GLpSf2FRmhexPvfYDUAB7EXX1Hdb3aMQ9FLqdJ56yaAhiXoRsceGJCRS3Jxkn.5d3c802ee0f8e12e4eb9792722b7816a42178aa29ef7477c138ddb940c55648d.rig1
pause

The program starts as usual by double-clicking on the file with the extension .bat

Running the program, we will see the following window:

We wrote in the batch file only those commands that will help to connect to the pool and start the cryptocurrency mining process. However, to improve performance, you need to configure some other command line arguments, depending on the type of equipment you have.

SRBMiner-MULTI Command Line Arguments

Connection settings for the pool:

--pool url:port pool address: port
--wallet address user wallet address
--password value pool password
--tls value use TLS (true or false)
--nicehash value force nicehash (true or false)
--job-timeout value indicate the time, if no tasks were received during this period, the miner will reconnect. Disabled by default
--max-difficulty valuespecify a decimal number, if the pool complexity is higher than this value, the miner will reconnect to the pool
--start-block-height value indicate the number when to start production, if a certain block height is reached. The pool must send this information.
--algo-min-time value indicate the time used with the ability to switch the algorithm, the minimum time for mining the same algorithm. The default is 10 minutes.
--keepalive value send a command to the pool that the miner is working so that the connection does not break (true or false, not every pool supports this)
--algorithm value mining algorithm
--retry-time value — here indicate the time, how long to wait before trying to reconnect to the pool
--send-stalessend balls to the pool that the miner considers obsolete
--give-up-limit value how many times to try to connect to the pool before switching to the next pool
--main-pool-reconnect value time, how often you need to try to reconnect to the main pool. 10 minutes by default

time, how often you need to try to reconnect to the main pool. 10 minutes by default

--cpu-priority value indicate the priority of the miner process (1-5), where 5 is the highest
--cpu-threads how many processor threads to use for mining
--cpu-affinity value specify a thread affinity bit mask
--disable-cpu-optimisations use only SSE2 for mining on video cards (SSE2 is a set of instructions that determines the capabilities of a particular processor)
--disable-huge-pages disable the use of the option “Lock pages in memory” - it is recommended to enable
--disable-hw-aes use only AES for mining on the processor (AES is a set of instructions for the processor)
--disable-numa disable binding to numa nodes (Uneven memory access)
--disable-tweaking disable video card configuration options that are enabled by default
--set-compute-mode put AMD graphics cards into computing mode and disable crossfire (runs as administrator)

Video Card Performance Settings:

--reset-vega disable / enable Vega video cards when you run the miner
--gpu-intensity value indicate video card intensity (1-31) comma separated values
--gpu-raw-intensity value иuse raw intensity for extra performance, comma separated values
--gpu-threads value indicate the number of video card streams, values separated by commas
--gpu-worksize value specify worksize video cards, comma separated values

Temperature and fan settings:

--gpu-target-temperature value indicate the temperature of the video card, values separated by commas. Miner will try to maintain the set temperature on all found video cards
--gpu-off-temperature value indicate the temperature off the video card, values separated by commas
--gpu-target-fan-speed
value indicate the speed of the video card fan in rpm, values separated by commas

Select devices:

--gpu-id value indicate the identifier of the video card from --list-devices, comma separated values
--disable-cpu disable mining on the processor
--disable-gpu disable mining on the graphics card
--list-devices display (list of available video cards sorted by busid

Watchdog timer settings (reboot):

--disable-gpu-watchdog disable video card failure detection
--gpu-watchdog-disable-mode if enabled, the watchdog will try to disable the hanging cards instead of restarting the miner
--reboot-script-gpu-watchdog file name, if installed, disables the built-in restart procedure when video cards fail and runs this script instead
--watchdog-rounds value indicate how many rounds to count (round 30 seconds) so that gpu-watchdog is called. The default is 5.
--disable-startup-monitor disable watchdog timer for miner launch interval
--enable-restart-on-rejected enable automatic miner restart if there are too many rejected ball. Installed with --max-rejected-shares
--max-rejected-shares value the maximum number of allowed rejected balls in the connection. The default is 20 if --enable-restart-on-rejected is enabled
--max-no-share-sent value time, if the pool does not accept balls for x times, restarts the miner [default 0 - disabled]
--shutdown-temperature value if this temperature is reached, the miner will turn off the system (ADL must be enabled
--max-startup-time value indicate the time, the maximum time to start video cards and start mining. Default 2 minutes
--startup-script filename run your own script when you run the miner - set acceleration, voltage, etc.

Error log file settings:

--extended-log enable more informative logging
--gpu-errors-alert value notify when the number of calculation errors for any video card reaches this value [default 0 - disabled]
--log-file filename enable logging to file

Configuration files:

--config-file filename use a configuration file other than config.txt
--pools-file filename use a pool file other than pools.txt
--setup run interactive mode to create basic configuration files

Other settings:

--adl-disable disable ADL (ADL is a library for accessing driver functionality for AMD graphics cards)
--background launch miner in background, without console window
--enable-workers-ramp-up allow workers a slow start
--forced-shutdown never free resources when rebooting / shutting down
--list-algorithms display a list of available algorithms
--max-startup-time-script filename run the script if maxstartuptime is exceeded
--disable-extranonce-subscribe do not send mining.extranonce.subscribe data to the pool
--gpu-adl-type value indicate ADL to use (1 or 2), comma separated values
--gpu-tweak-profile value indicate the number of optimization profile from 0 to 10, 0 disables the setting

API Settings:

--api-enable enable API for statistics
--api-port value indicate the port on which the statistics API is available (default 21550)
--api-rig-name value, then specify the name of your farm identifier in the statistical API
--api-rig-restart-url value specify the URL available in the browser (starts restarting the computer
--api-miner-restart-url value determine the URL available in the browser, causes the miner to restart
--api-rig-shutdown-url value determine the URL access to which in the browser causes the computer to shut down

Leave a Reply

Your email address will not be published. Required fields are marked *

Next Post

Download AwesomeMiner v8.0.1 Crack [CPU/GPU/ASIC/FPGA]

Tue Dec 3 , 2019
This post is also available in: Русский Awesome miner Crack (Nvidia & AMD CPU GPU miner) – One of the most multifunctional miners supporting graphics cards from both AMD and Nvidia. In addition, there is the possibility of mining on the CPU. Changelog: Version 8.0.1 GPU mining - Improved output […]
Awesome miner 7.1.6 Crack (Nvidia & AMD) DOWNLOAD