OverdriveNTool v0.2.8 (Overclock and Underclock AMD GPU)

This post is also available in: ruРусский

OverdriveNTool служит для разгона GPU с поддержкой API AMD OverdriveN (290, 290x, 380, 380x, 390, 390x, Fury, Fury X, Nano, серии 4xx, 5xx, Vega 56, Vega 64) и API Overdrive8 GPU (в настоящее время Radeon VII). Эта программа пришла на замену WattTool, который не работает с 17.7.2 версии драйвера.


  • System: Windows 7 and newer builds.
  • GPU: AMD 290, 290x, 380, 380x, 390, 390x, Fury, Fury X, Nano, 4xx, 5xx series, Vega 56, Vega 64, Radeon VII.
  • Driver: 17.7.2 and later.


  • Error bypass in drivers 17.7.2, when the driver sometimes uses default voltages instead of user settings. Use a reset and reapply profile.
  • It is possible to disable / enable each state of P. To do this, click on the shortcut P0, P1 .., etc. If the state P is disabled, it will not be used by the GPU.
  • I2C currently supports: IR3567B (RX470, RX480, some RX5xx), up9505 (MSI RX5xx)
  • If you prefer not to touch the fan settings. You can disable the Fan section for each GPU. To do this, press Ctrl + double-click somewhere in the fan window. It is saved in accordance with gpu_id, so the graphical interface or command line will not affect the fan settings for such a GPU.
  • To open the settings or SoftPowerPlayTable editor, left-click on the program icon in the upper left corner or right-click on the title.
  • To change the “friendly name”, first enable it in the settings. Then right-click the GPU list to open the menu.


0.1 (06.08.2017):
— initial release
0.1.1 (07.08.2017):
— prevent using commandline on unsupported cards
— fixed bug with showing only first GPU on multiGPU configs
0.1.2 (08.08.2017):
— added -c command in commandline
0.1.3 (12.08.2017):
— added few more commands
0.1.4 (17.08.2017):
— added possibility to disable/enable each P state.
0.1.5 (18.08.2017):
-changed tab order for edit controls
-fixed bug with not listing all GPU’s on some configs
0.1.6 (19.08.2017)
-changed GPU list sorting to be like in other apps, for easier gpu recognition.
0.1.7 (26.08.2017)
-Now additional info about GPU is optional (system menu->settings)
-changed Pstate disabling/enabling to single click
-commandline support for more than 10 GPUs
-Power Target now allows negative values
0.1.8 (08.09.2017)
-fixed dpi bug introduced in 0.1.7
-added I2C support for IR3567B
0.1.9 (25.09.2017)
-added -consoleonly command in commandline
-added I2C support for up9505
-added Adapter index to gpu additional info
-GPU displayed on startup changed to first supported rather than first one
-Vega FE support in Pro mode
-fixed ini bug with random values for I2C when new profile is created
0.2.0 (02.10.2017)
-added possibility to deactivate Fan section
0.2.1 (19.10.2017)
-added SoftPowerPlayTable editor
-commandline fix to avoid error messages when driver is not installed
-added option to not include unsupported GPUs on the GPU list
0.2.2 (23.11.2017)
-added Friendly name and Registry key to gpu additional info
-SoftPowerPlayTable editor can now automatically restart GPU when click «Save» or «Delete»
0.2.3 (14.12.2017)
-added possibility to use * as gpu_id in commandline
0.2.4 (18.01.2018)
-fixed bug in QEMU PCI passthrough with showing only one GPU on multiGPU configs
-updated error messages to give more info
0.2.5 (13.02.2018)
-r command now also resets I2C offset and LLC when I2C is enabled and supported
-consoleonly command messages are now coloured
-fixed: ini file may lose it’s content on PC crash
0.2.6 (16.05.2018)
-added ini file backup feature
-added an option to hide ADL_ERR_NOT_SUPPORTED errors
-fixed: console messages may not be displayed on some systems
-added -getcurrent and -ac command to apply values without using profile
0.2.7 (09.11.2018)
-fixed: console messages may not be displayed on Windows 10
-added possibility to open .reg files with SoftPowerPlayTable editor
-added optional auto reset before apply
-added -t and -showgui commands
-added optional displaying an error when values are not as expected after apply
-for errors with ErrorCode -1 on apply now current driver limits are displayed
0.2.8 (16.04.2019)
-support for Fan Curve and Memory timing level introduced in 18.12.2 driver (Removed Fan Min, Fan Max, Fan Target Temp and Power Temp values)
-added -wait command
-added possibility to apply or reset all supported gpus at once by using Ctrl + Apply or Ctrl + Reset
-fixed bug with GPUs and profiles duplication when use -showgui command
-added support for Radeon VII

Recommended Related Articles

2 thoughts on “OverdriveNTool v0.2.8 (Overclock and Underclock AMD GPU)

  1. Wow! It is very cool! You helped me a lot!
    ready to financially help your project, please contact me!

Leave a Reply

Your email address will not be published. Required fields are marked *

Next Post

NoDevFee: How to disable the commission in the cryptocurrency miner.

Sun Sep 29 , 2019
In this article, we will look at how to disable commission in the miner using the NoDevFee (NoFee) program.
NoDevFee (NoFee)